郴州附近有没有服务

National Service Hotline: fifteen billion eight hundred and sixty-six million eight hundred and eighty thousand two hundred and eighty-eight

Our company has a professional team for the manufacture and maintenance of shot blasting machines. We are looking forward to the maintenance of large shot blasting machines. We welcome the maintenance units of shot blasting machines to contact and cooperate with us.

Scope of shot blasting machine, shot blasting machine and other equipment.


Daily maintenance of shot blasting machine
 
1. Whether the fixed bolts on the shot blasting machine and the shot blasting machine motor are loose, and fasten them immediately if they are found to be loose.  
 
2. Wear condition of wear-resistant parts in shot blasting machine and guard board in shot blasting chamber, and timely replace worn parts.  
 
3. Check the blades and replace them when they are half worn.
 
4. Check whether the pointer position of the orientation sleeve is correct.
 
5. Whether the access door of shot blasting machine is closed tightly.  
 
6. Whether there is dust in the filter or whether the dust bag is damaged.
 
7. Whether there is accumulation and other debris on the spiral shell and filter screen of the separator and remove them in time.  
 
8. Check whether the flow curtain of the separator is uniform and forms a full curtain.
 
9. Whether the ball valve is closed or not.  
 
10. Check whether the status of limit switch and proximity switch is normal.
 
11. Check whether the signal indicator on the console works normally.
 
12. Check whether the current of shot blasting motor is within the rated range.
 
Dust control on the electric box.   
 
14. Check the wear of the sealing gasket of the inlet pipe, the rubber guard plate of the working door and the top seal to avoid the loss of the shot.
 
15. Remove the debris on the bottom grid to ensure the recovery of the projectile.
 
16. Check whether the total amount of shot material in the shot bin is sufficient, and if it is insufficient, it should be added.
 
According to experience, "the shot blasting machine is maintained in seven parts and repaired in three parts". Due to the characteristics of the shot blasting machine, the wear and consumption of its accessories are very large. Therefore, the key to prolong the service life of the shot blasting machine and its accessories is to maintain it according to the operation and maintenance rules of the shot blasting machine.